Ford Performance Gen 4 Coyote Crate Engine

Upgrade your ride’s performance and style with the Ford Performance Gen 4 Coyote Crate Engine  480HP Crate Engine (M-6007-M50D) with Flywheel, the ultimate power complement to 5.0L Coyote Gen 4 Engines.Featuring a hypereutectic aluminum piston construction and sintered steel connecting rods, this engine has been engineered to deliver a jaw-dropping 480 horsepower at 7,150 rpm and 415 lb.-ft. of torque at 4,900 rpm.

Features and Benefits:
– 480 horsepower at 7,150 rpm
– 415 lb.-ft. of torque at 4,900 rpm
– 12.0:1 compression ratio
– Bore 93mm x stroke 92.7mm
– Hypereutectic aluminum pistons
– Sintered steel connecting rods as used on BOSS 302 Mustang
– Forged steel crankshaft
– Aluminum block which features plasma transferred wire arc spray weld liner coating
– Longer, 12 mm head bolts for higher clamp load
– 9.5-quart capacity steel oil pan
– Optimized oil drain back and windage control improves high-rpm performance
– Cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength
– Tuned composite intake manifold provides efficient air delivery and weight savings
– Twin 80mm single bore “drive by wire”
– Electronic throttle bodies with variable runner control
– High-flow aluminum cylinder heads and dual overhead camshaft (DOHC)
– Four valves per cylinder, variable intake, and exhaust camshaft timing
– Includes engine harness and dual mass flywheel
– Engine mount bosses and bell housing mount pattern common to 5.0L modular engines
– Engine weight: 453 lbs. without front accessory drive components

The aluminum block’s plasma transferred wire arc spray weld liner coating and cross-bolted main bearing caps ensure superior strength and reliability. A tuned composite intake manifold and twin 80mm single-bore throttle bodies provide exceptional air delivery and weight savings. With optimized oil drain back and windage control, this engine delivers impressive high-rpm performance and sets new standards in performance and reliability of the Ford Performance Gen 4 Coyote Crate Engine .

Vehicle Fitment:
– 1965-2025 GT 5.0L Mustangs with Manual Transmission
– 2011-2025 F-150
– 1966-1977 Bronco
– 1948-1979 F-100

Tech Tip:
– Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY.

Please Note:
– The driver-side exhaust flange utilizes a 5.2L pattern and will not work with any Gen 1, 2 or 3 Coyote exhaust manifolds.
– Does not include vehicle harness or PCM.